Lathes for sale

These machines can be purchased as is or can be purchased with additional tooling, additional services, and or additional attachments such as DRO's and power feeds. We have to much additional tooling to list so please contact us with any questions. Take a look at our Services page to see some examples of past machines that have been serviced and delivered.

Please note that our website does not contain a full listing of all our machinery, therefore, we always recommend Contacting us for the most up to-date information on all machinery we have available.

13x40 Jet GH-1340W-3 Geared Head Engine Lathe - NEW -  FOR SALE

$5,500.00
BRAND NEW Jet Geared Head Engine Lathe for sale. Only been run for testing purposes. Everything is in great condition; the machine is still on the original pallet.   It is under power and can be seen and/or tested by appointment. Missing chip guard/shield pan. Comes with tooling, see below for more information.
Features:
  • 1-1/2" bore spindle supported by precision tapered bearings
  • Hardened and ground gears are featured in the headstock and gearbox
  • Gearbox provides larger threading and feed capabilities with no gear changes
  • V-way bed design is induction hardened and ground
  • Independent leadscrew and feed rod
  • Spindle actuation control is apron mounted
  • Inch-metric dials are standard
  • Compound and cross slide have backlash elimination
  • Adjustable gibs are incorporated in the carriage and slideways
  • Tailstock may be offset for turning tapers and includes an inch-metric graduated quill
  • Heavy duty stand
  • 6" 3 jaw direct mount chuck with top reversing jaws
  • 8" 4-jaw independent chuck
  • 12" face plate
  • Four-way tool post
  • Steady and follow rest
  • Micro-carriage bed stop
  • Front removable chip tray
Specifications:
  • Size 13 x 40
  • Swing Over Bed (In.) 13
  • Swing Over Cross Slide (In.)  7-1/4
  • Swing Through Gap (In.) 19
  • Length of Gap (In.)    9-3/8
  • Distance Between Centers (In.) 40
  • Spindle Bore (In.) 1-1/2
  • Spindle Mount            D1-4
  • Spindle Taper with Sleeve MT-5 (MT-3)
  • Number of Spindle Speeds 12
  • Range of Spindle Speeds (RPM)  40 - 1,800
  • Number of Longitudinal and Cross Feed Rates 40
  • Range of Longitudinal Feeds (IPR)   .0011 - .0271
  • Range of Cross Feeds (IPR)   .0003 - .0103
  • Number of Inch Threads 40
  • Range of Inch Threads (TPI)  4 - 112
  • Number of Metric Threads 22
  • Range of Metric Threads 45 - 7.5
  • Max Tool Size (In.)  5/8 x 5/8
  • Compound Slide Travel (In.)  3-1/2
  • Cross Slide Travel (In.) 6-3/8
  • Carriage Travel (In.) 37-1/2
  • Tailstock Spindle Travel (In.) 4-3/4
  • Taper in Tailstock Spindle MT-3
  • Follow Rest Capacity (In.)  2-3/4
  • Steady Rest Capacity (In.)  3-1/2
  • Width of Bed (In.)  10-1/4
  • Motor (HP) 3 HP, 230/460V, 3Ph
  • Prewired (V.)  230
  • Weight (Lbs.)  2,081
  • Overall Dimensions (L x W x H) (In.) 78 x 38 x 59

Hardinge HLV-H for sale with lots of tooling for sale

$9,800.00
This Hardinge is in great shape! One of the best I have seen. It is fully functional. This one you have to come and see run.

Machine will come with the following

• NEW AXA ALORIS wedge type tool post with 2 holders
• Hardinge 3 jaw chuck
• Hardinge 4 jaw chuck
• 5-C lever action collet system
• NEW live and dead centers
• 1/2" cap Jacobs drill chuck
• NEW 1/2" cap keyless drill chuck
• Miscellaneous cutting tools
• Full set of 5-C collets, misc E collets, and misc I.D. collets
• Set of new indexable tools including 4 turning and facing tools, a parting tool, and a threading tool

Leblond Regal 19x54 Servo Shift Inch & Metric 3 1x8 inch spindle Bore lathe for sale with lots of tooling

$10,000.00
This is a nice lathe.  Machine cuts inch and metric threads with no major gear change. Just pull a knob. Spindle mount is a D1-8 cam lock.

Tooling Included:
• Sony Magnetic Scale DRO
• New CA wedge type tool post with 2 holders
• New Bison 10" 3 jaw chuck
• 18" 4 jaw chuck
• 18" face plate
• 12" fixture/dog plate
• 5-C lever action collet system
• 2 steady rests (1 roller 1 brass pin)
• New live and dead centers
• New 5/8" cap drill chuck
• New 1/2" cap keyless drill chuck
• CLEAN coolant system
• Miscellaneous cutting tools

SOLD - Cincinnati Hydrashift 10" x 24" 3hp Lathe with lots of TOOLING

$4,500.00
Cincinnati Hydrashift 10x24 3hp Lathe For Sale

This is a tight well running machine, heavy duty and accurate machine for its size. Machine can be ran under power, we have included a video of the machine under operation to this listing (scroll down to find video).

Tooling included:
  • BRAND NEW 10" Bison 3 Jaw Chuck
  • BRAND NEW 4 Jaw Chuck
  • BRAND NEW 8" Gibraltar 3 Jaw Chuck
  • BRAND NEW AXA Tool Post Set
  • Level Action 5C Collet Closer Assembly
  • BRAND NEW Set of turning, threading and parting tools
  • BRAND NEW 1/2" boring bar

SOLD - Southbend Heavy 10L Toolroom Lathe with Taper Attachment

$3,200.00
Model: 10L Heavy CL8187AB
Serial Number: 11022RKX15

4ft bed

Equipped with:
  • Steady rest
  • Follow rest
  • Taper attachment
  • Thread dial
  • Cabinet base

SOLD - 15" x 50" cc Clausing Colchester Engine Lathe

$4,000.00
Clausing Colchester 15 x 50 Engine Lathe for sale.

We have the pans, chip guards, steady rest and other misc tooling (not pictured). Email or call for more details.

SOLD - 22" X 100" Cadillac Model 22100 Engine Lathe

$6,000
22x100 Cadillac Engine Lathe for sale.

Specifications:
Swing Over Bed   -  22"
Swing In Gap -  29"
Distance Between Centers      100"
Spindle Speeds (12)      25- 1,500 RPM
Inch/Metric Threads

Equipped With:
  • 3 Jaw Chuck
  • 4 Jaw Chuck
  • Steady Rest
  • Face Plate
  • Live Center
  • Dead Center
  • Tool Post With Holders

SOLD - 17x42 Leblond Regal Engine Lathe

$4,500
17x42 Leblond Regal Engine Lathe for sale.

Email or call for more details.

SOLD - 20x80 LONGEM GAP BED ENGINE LATHE 3 INCH SPINDLE BORE

$6,500
A very well taken care of 20" x 80" Longem Gap Bed engine lathe with 3 inch spindle bore for sale.

EQUIPPED WITH:
  • 16" 4-Jaw Chuck with 1-Piece Hard Reversible Jaws
  • 16" 3-Jaw Chuck with 1-Piece Hard Reversible Jaws
  • 16" Face Plate with Camlock Backing
  • (1) Chuck Wrench
  • (2) Live Centers
  • Wedge Type Tool Post
  • Bolt on Follower Rest
  • Roller steady rest
  • Hardened and Ground Bed Ways in Good Condition
  • Thread Chasing Dial
  • All Traverse Dials Have Inch Graduations
  • Built in Coolant Pump and Sump